Jump to content


HITFlash

¿Quieres enterarte al momento de las nuevas descargas? Síguenos en Twitter, Mastodon o Threads!

------------------------------------------------------------------
Birdy Hitachi friendly Flasher with Xtreme v1.2 All versions
------------------------------------------------------------------


RELEASE INFO:


  Friendly Flasher (Windows application) for Hitachi drives
  Includes Xtreme hack 1.2 for All versions

FEATURES:

- Auto-Detect Hitachi Drive connected to Windows and its
  firmware version

- Can restore / flash with user friendly interface

- Auto Retry if flashing or restoring fails

- Auto Verify if Flash / Restore went sucessfully

- Xtreme Hack 1.2 contains all the goodies mentioned on 
  previous releases (see releases from birdy and garyopa)


Currently I am working on merged version with the F900 (extract 
security sectors) and with a Stealth mode. Stay tuned.

Technical details
-----------------
Security sectors are read in this order:

Reads Xbox 360 security sector from PSN 04FB1F (Layer 0)
Reads Xbox 1 security sector from PSN 605FF (Layer 0)
Reads Xbox 360 security sector from PSN FD021E (Layer 1)

Flashes sector 9003e000 (Master Checksum)
Flashes sector 90035000 (Security Sector Read)
Flashes sector 9001c000 (Drive Response Table Decrypt)
Flashes sector 90003000 (Custom Code)
Flashes sector 90027000 (Challenge Response) (v46/v47/v59)
Flashes sector 90026000 (Challenge Response) (v32/v36)


Flashing your drive
-------------------
*  This application automatically makes a backup of your firmware and asks for save
   location.
** Make sure you are flashing over an ORIGINAL image on your drive, if needed first
   do a RESTORE.  Undesired results can be achieved if you flash over a previously
   flashed image.

- Plug SATA cable from DVD drive to PC
- Power cable drive still connected to Xbox 360
- Ensure drive is in mode b either by two wire trick or slax linux boot cd
- Go to Windows
- Run hitachiflash.exe and if the drive is properly connected it should get detected
- Choose the Action: "Patch your firmware with xtreme 1.2"
- Hit go and wait, 
- There will be a prompt asking where you want to place the backup of the original
  firmware (before patching)
- The flash must start, if some "retry" windows appears hit YES/OUI until finished
- At the end the application will check for 100% so you can shut down the system

Thats all


Restoring your drive (Requires previously saved Firmware Image)
---------------------------------------------------------------
- Plug SATA cable from DVD drive to PC
- Power cable drive still connected to Xbox 360
- Ensure drive is in mode b either by two wire trick or slax linux boot cd or if you
  have the Xtreme 1.2 then use the TWEAK starting the box with the tray opened
- Go to Windows
- Run hitachiflash.exe and if the drive is properly connected it should get detected
- Choose the Action: "Restore Original firmware"
- Hit go and wait, 
- There will be a prompt asking for your original UNENCRYPTED image
- The restore must start, if some "retry" windows appears hit YES/OUI until finished
- At the end the application will check for 100% so you can shut down the system

Thats all

Thanks:
----------------
To everyone at Xboxhacker.net and x360.gx-mod.com for all their discussions.
To Seventhson for flashsec and memdump.
To Commodore4Eva for the original Hack Release.
To Spectrum4Eva for the F900 release.
To Loser for firmcrypt.
To Garyopa for ppf files and port the hack to all versions.
Also thanks to
DJTOTO and carranzafp for beta testing the software


No te pierdas nada, síguenos en Twitter, Mastodon o Threads!
Preguntas, aportes y peticiones en el foro.

×
×
  • Crear nuevo...