Many thanks to xerpi for the userland memory leak exploit ps3 port, zecoxao & Joonie for their early & continued support, mysis for documenting vsh exports & plugins, the psdevwiki contributors of course, STLcardsWS for his long standing contribution & all ps3 community hackers/devs past & present, you know who you are...
NAND Support:
- Supports 4.85 HFW Firmware ONLY!!!
-
DO NOT USE ON ANY OTHER FIRMWARE VERSION OR ON CFW OR YOU WILL BRICK YOUR CONSOLE!
Supports Phat Models CECH-Axx/Bxx/Cxx/Exx/Gxx
NOR Support:
- Supports 4.85 HFW Firmware ONLY!!!
- DO NOT USE ON ANY OTHER FIRMWARE VERSION OR ON CFW OR YOU WILL BRICK YOUR CONSOLE!
- Supports Phat Models CECH-Hxx/Jxx/Kxx/Lxx/Mxx/Pxx/Qxx
- Supports Slim Models CECH-20xx and CECH-21xx
- Supports Slim Models CECH-25xx (minver 3.56 or lower ONLY, always check with minverchk.pup or risk a partial brick!)
** CAUTION: MISHANDLED FIRMWARE FLASHING CAN LEAD TO A BRICK - USE AT YOUR OWN RISK!!! **
** DO NOT USE THIS ON CECH-4xxxA OR YOU WILL BRICK YOUR CONSOLE!!! **
** DO NOT POWER OFF THE CONSOLE ONCE STARTED. IT MAY RESULT IN A BRICK! **
** MAKE SURE TO USE AN UNMODIFIED & MD5 CHECKED "flash_485.hex" FILE ON USB DEVICE! **
** THE MD5 OF "flash_485.hex" MUST BE: 2D74B066E7453E6B1336E36C410FB1EB **
THE PATCHING OPERATION MAY TAKE A FEW MINUTES
by PS3Xploit Team.